You have no items in your shopping cart.
|Specs||DDR PC2700 • CL=2.5 • Unbuffered • NON-ECC • DDR333 • 2.5V • 128Meg x 64 •|
|Bullet Features||Increases system performance|
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 DDR SDRAM.
To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)
The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.
|Minimum Read Speed||No|
|Minimum Write Speed||No|
|Minutes of 720p HD Video||No|
|Number of Tracks||No|
|Minutes of 1080P HD Video||No|
|Number of RAW Images||No|
|Number of JPG100||No|
|Warranty||10 Years / Lifetime|
|Maximum Read Speed||No|
|Maximum Write Speed||No|
|Sequential Read Speed Up To||No|
|Sequential Write Speed Up To||No|
|Random Read up to||No|
|Random Write up to||No|
|Connectivity / Interface :||No|
|Add On Item||No|